3 1/2" Bernard of Pall Mall

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (tiptop) — Wed, 18 Mar 2009 16:29:00 GMT

Seriously though . . . I have one Dingley that has a foot mounted with 2 machine screws that I replaced with a brass foot from One P-foot. It was made as a replacement foot for Young reels, but the holes were a perfect match. The original foot is now in a plastic zip-lock that will probably be thrown out when I die. The other alternative is to buy a classic rod that the foot will fit. My Grangers and...

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (tiptop) — Wed, 18 Mar 2009 15:55:18 GMT

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (Short Tip) — Wed, 18 Mar 2009 00:09:26 GMT

Here's a later 3 1/4" (Ernest?) Dingley perfect. It had a horrible homemade foot. I had Bill Archuletta make a new (exact duplicate) regulator screw and he went ahead and made 2 screws for the foot. (The original screws were incorrect replacements)Bulldog sent me an "Old Young Pfoot", I got the reel back this week, and it all went together right out of the box. Even the top radius of the foot, where it snugs against the reel body, is an exact, tight fit. I'm happy....

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (dl6603) — Tue, 17 Mar 2009 22:26:36 GMT

Thanks again everyone. I have looked at Onepfoot before. I will probably get in touch with him soon.

I understand the appeal of this type of reel. I also don't want to mess it up.

I'm glad I posted the questions. It has really been fun to learn more about these reels.

Don

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (pcg) — Tue, 17 Mar 2009 20:55:17 GMT

My experience as well is that almost all the Dingleys are bench made, with the foot being drilled by eye. If you take one off & then try to put it back, you'll notice that there's always a "correct" alignment--one direction works, the other doesn't. That's probably why the reels all have feet punched with the same number as the reel interior. The feet were not interchangeable. Part of the great charm of these.

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (bmwmoa67707) — Tue, 17 Mar 2009 20:09:49 GMT

Don, I have a 3 1/2 inch Dingley with a foot that was too long for anything....so I called Bill Franke at OnePfoot and sent the reel to him and he made one that works on everything well.....did a great job....steve

also, the screw alignment and spacing was not symetrical.....Bill said they were frequently "cockeyed" and he needed the reel to get the holes to line up.....

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (Sparquero) — Tue, 17 Mar 2009 17:37:10 GMT

Appearances can be deceiving, dimensions have no consistency at all.
Measured two pre war 3 1/2" reels and the reel foot spacing was 7/8" and 3/4".
Measured two post war 3 1/2" reels and the dimensions were 7/16" and 11/16".
I guess it might be advisable to have the measurement of the reel foot screw spacing on a potential reel purchase prior to buying.
I thought that the dimensions would have been about the same on reels of the same size...

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (dl6603) — Tue, 17 Mar 2009 12:32:12 GMT

I measured the spacing and it is 7/16" between centers. I will take and post pics when I get back to the house. Thanks for the info on the age of the reel.

Don

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (Sparquero) — Tue, 17 Mar 2009 12:24:38 GMT

Don - My reel is the same size as yours, measures a hair under 3 1/2", I said older brother not bigger brother. I also looked at a few pre & post war Dingley models and the spacing on the foot screws is not the same. The foot screw spacing on the pre war reels seems to be consistent and the spacing on the post war reels also appears to be consistent. Perhaps someone has a damaged reel that you can purchase...

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (dl6603) — Tue, 17 Mar 2009 11:46:58 GMT

MFRS,

Thank you. I will measure this morning and see what I can come up with.

Don

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (MFRS) — Tue, 17 Mar 2009 11:43:55 GMT

Don, I would measure the distance between the foot screws at dead cente(DC), request a later possible Ernest Dingley 3 1/2 with same measurements, in the classifieds here. You have the three days to evaluate the fit and you may end up with a reel plus a foot at the cost of having a foot made professionally. Just a thought, and you would have a reel to house your original foor so it is less likely to get lost. The 3 1/2 WB I have is 5/8 " between the screws at DC so maybe this distance...

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (dl6603) — Tue, 17 Mar 2009 11:27:52 GMT

Paul,

That's a nice reel. I like the graphite finishes. What size is your reel?

Don

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (dl6603) — Tue, 17 Mar 2009 11:24:49 GMT

Thanks for the helpful information. I will try something temporary and harmless first. Then I might try to put a smaller foot on the reel and save the original foot. I forgot to put a picture of the bottom of the foot. It is a two screw version.

Anyway, thanks again.

Don

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (Sparquero) — Mon, 16 Mar 2009 16:17:44 GMT

Don - I have found that most fixed end of the reel seat will accommodate the larger reel foot but the sliding ring won't. I usually fit the reel foot into the fixed end and use black vinyl electrical tape to tightly hold the other end (Vinyl tape will stretch quite a bit and can be wound tight after stretching) and then tighten the screw ring up to snug it. Also have used leader material in a pinch.
Only other option is to replace either reel seat or reel foot.
Also I have...

Re: 3 1/2" Bernard of Pall Mall

feeds@yuku.com (pcg) — Mon, 16 Mar 2009 15:55:59 GMT

A relatively early WH Dingley reel. Nice.

3 1/2" Bernard of Pall Mall

feeds@yuku.com (dl6603) — Mon, 16 Mar 2009 15:15:31 GMT

I picked this reel up last fall. I was wondering if anyone could help with information. Reel works really well. I carefully cleaned an old crusted line off using methods suggested on this forum. Didn't do anything to the finish. Left as I got it.

I hoped to fish with one of my 9' Grangers, but reel foot is too long. Any solutions?

Thanks, Don

...