| Author | Comment | |||
|---|---|---|---|---|
 LeeB |
High-end Heddons |
Lead | ||
|
Posts: 4 12/04/2008 21:48 |
I've been looking at a Heddon Expert (#125) recently, but know very little about this model. I understand that for many years, their top-of-the-line models
were the 35, 50, and 1000. I believe the #125 and #115 were not introduced until around 1950. Can anyone give me any information regarding the quality of the
Model 125, and how it would compare to the better known Models 35, 50, and 1000. Thanks very much.
Lee |
|||
|
|
||||
|
tedgolden |
#1 | |||
|
Posts: 2658 12/04/2008 21:54 Moderator |
Lee, beware of cracked ferrules on the 125 models. This problem is not uncommon on this model. By contemporary criteria , the 125 was a high end Heddon
rod. Other than the ferrule problem, I would consider them very well made rods. Drew
|
|||
|
|
||||
|
WatercolorMan |
#2 | |||
|
Posts: 1155 12/05/2008 05:43 |
Making the rod look nice the ferrules had a decreased there strength. If you factor in replacing them the rod should be great. Many people shop for a #20 or
higher # which were the top rods built by Heddon in the custom rod section of the shop.
The 115 and 125 were # sold by Sears & Roebuck and never fit into the Heddon # system. |
|||
|
|
||||
|
bobbeegee |
#3 | |||
|
Posts: 2147 12/05/2008 07:59 |
I believe the 125 Sears rod was built using bamboo equal to the Heddon Model 20.
It's a fine rod; however, I would have to agree as to the ferrules being weak and prone to cracking. Personally, I would characterize Heddon high-end rods as Model 35 and up. Bob Go Heels!!!
Last Edited By: bobbeegee 12/05/2008 08:12.
Edited 1 time.
|
|||
|
|
||||
|
reelill |
#4 | |||
|
Posts: 201 12/05/2008 11:19 |
I agree with Bob concerning the ferrule problem I also agree that the 35s and above are in a class of there own. I especially love the early versions, 1930s,
in my opinion their as good as they get.
Having said that, ferrule problem and all, I wouldn't pass on a nice 125 if priced fair. They are beautiful and fish well. My Opinion Here are a couple of photos with an example of each Richard  
|
|||
|
|
||||
|
bobbeegee |
#5 | |||
|
Posts: 2149 12/05/2008 17:29 |
Very nice Richard!
Bob Go Heels!!! |
|||
|
|
||||
|
MontyMontana |
Ah..I resemble that, I think. | #6 | ||
|
Posts: 410 12/05/2008 17:46 |
Richard,
Is that top rod now sitting in my rod rack?.......it is one very nice casting rod (after the little problem was fixed) Monty Montana
Your Signature ... I fish via our criminal justice system..."Catch and release"
|
|||
|
|
||||
|
aquabonito |
#7 | |||
|
Posts: 905 12/05/2008 23:41 Angry Andy |
Heddon also graded the bamboo according to model numbers. Only the very best went into the top models. The #20's were built from start to finish by the
same craftsman, the lesser numbered rods were made on a production line. But I really like Heddons. My current favorite is a 7 1/2 ' #10 Blue Waters
model, a bit down the Heddon line but nevertheless a great fishing rod.
"You can't make new old friends"
 Andy
Last Edited By: aquabonito 12/06/2008 14:57.
Edited 1 time.
|
|||
|
|
||||
|
WatercolorMan |
#8 | |||
|
Posts: 1158 12/06/2008 03:24 |
Those rods sure look great. I like the looks of there high end rods.
I agree with you Andy. . . . |
|||
|
|
||||
|
LeeB |
#9 | |||
|
Posts: 5 12/06/2008 07:39 |
Guys - great information and photos, very helpful. Thanks!!
|
|||
|
|
||||
|
reelill |
#10 | |||
|
Posts: 202 12/07/2008 22:01 |
I think your right Monty. I forgot who the luckyman was.
Richard |
|||
|
|
||||
|
cebfishing |
#11 | |||
|
Posts: 471 12/10/2008 23:42 |
The 125 Expert was of Heddon model 20 guality throughout. However as stated, the ferrules are a problem and a tendency to crack. I have a few 115 and 125. If
the ferrule can be replaced without completely refinishing the rod, then the investment is worth it. However paying top dollar for a nice rod that has to be
completely refinished can be quite expensive. Either way, you will have a nice rod for fishing.
Chuck
Last Edited By: cebfishing 12/14/2008 22:17.
Edited 1 time.
|
|||
|
|
||||
|
bamboorods |
High end Heddons | #12 | ||
|
Posts: 282 12/11/2008 16:23 |
As I recall, Mike Sinclair noted the Heddon used four different grades or suppliers for their rods. The ferrules on my model 10's, 13, 17, 20, 35, and the
50 and 60 show a marked difference. I suspect that Allen supplied the high end fellules. Would that be accurate?
Bamboorods |
|||
|
|
||||
