| Author | Comment | |||
|---|---|---|---|---|
gearboy.fiberglassflyro... |
Softening Cork Problem |
Lead | ||
|
I have one or two cork rings on a grip on a cheap but great casting rod that have become very soft compared to the others. Is there something I can put over
them to save them or should I just let them go and get them replaced at a later date ?
Last Edited By: gearboy 06/13/2009 22:50.
Edited 1 time.
|
||||
|
|
||||
thousandstar |
#1 | |||
|
If you love the rod, it sounds like an excellent candidate for a new grip and reel seat. If you don't feel comfortable replacing the grip you might try
birchwood casey "true oil" on the cork. I know this has been used on cork, but I have no direct experience with tung oil's on cork. What material
is the rod made from?
|
||||
|
|
||||
gearboy.fiberglassflyro... |
#2 | |||
|
It's an old glass rod.
|
||||
|
|
||||
Lee Koch |
mineral oil | #3 | ||
|
Mineral oil, bought at a pharmacy, is the classic re-hydrator recommended for dried out cork. You might try that before considering replacing rings, or at
least to delay the inevitable. Lee
|
||||
|
|
||||
bluejayee |
#4 | |||
|
Hi Guys, I use Minwax furniture wax on all my grips. It seals and hardens them. It's waxy at first but then it's not. Jay Edwards
|
||||
|
|
||||
gearboy.fiberglassflyro... |
#5 | |||
|
Jay, I can't find Minwax. Is Johnson's Paste Wax or Trewax Clear Paste Wax the same stuff ?
|
||||
|
|
||||
Zenkoanhead |
#6 | |||
|
True-oil will yellow the cork. I prefer a wiping varnish, Arm-R-Seal being my favorite. Multiple coats will provide a thin but hard shell. I coated some cork I
accidentally softened with bleaching agents and it hardened up nicely. If you sand the cork with 400 grit first, you can create a slurry and fill in the pits
before finishing with 600 grit as well. Don
|
||||
|
|
||||
gearboy.fiberglassflyro... |
#7 | |||
|
I tried Minwax furniture wax and it didn't help. I used about 4 or 5 coats and it didn't harden the soft rings.
|
||||
|
|
||||
Zenkoanhead |
#8 | |||
|
Clean it well with alcohol and consider the varnish route. You can apply varnish on a test grip to see what you can expect. Don
|
||||
|
|
||||
gearboy.fiberglassflyro... |
#9 | |||
|
Arm-r-seal did the trick. I put on many coats, let it dry about 2 hours or so between coats, sometimes I lightly sanded with 600 grit dry, then recoated. It
did a great job and hardened the real soft rings. Thanks Don !
|
||||
|
|
||||