I was spoiled by having an Orvis shop about a mile away and a young man there would add backing or change lines to different reels using an electric winder -- but the store closed some time back.
Thanks,
Dennis
| Author | Comment | |||
|---|---|---|---|---|
dennis.fiberglassflyro... |
Lining your reels |
Lead | ||
|
What set-up are you using to line your reels? Is there something commercially available for the infrequent addition of backing and changing lines.
I was spoiled by having an Orvis shop about a mile away and a young man there would add backing or change lines to different reels using an electric winder -- but the store closed some time back. Thanks, Dennis |
||||
|
|
||||
Short Tip |
#1 | |||
|
Get a Struble folding linewinder if you can find one - basically a knockoff of the old Hardy design - It's the best one out there, IMHO.
Last Edited By: Short Tip 07/12/2009 15:11.
Edited 1 time.
|
||||
|
|
||||
Bivisible |
#2 | |||
|
For installing or removing backing I have been using the Reel-E-Good line winder. Not perfect but it's better than a pencil and I have found that I could
use it with a variety of spools by wrapping masking tape on the winder arbor to fit spools with larger holes. There is a small attachment that is supposed to
enable use with an electric drill but I have not tried it. Using it manually one still has to use care in winding the backing on evenly.
|
||||
|
|
||||
ttrotter |
#3 | |||
|
What Short Tip said and I would also get an E-Z Line Winder to go with the Struble. Different than the Struble, but if you have both you'll be amazed at
the versatility they will give you. (save all your spools and boxes from the original lines!)
Have fun! Tom |
||||
|
|
||||
ttrotter |
#4 | |||
|
Sorry, Reel-E-Good is what I meant!
Tom |
||||
|
|
||||
Marty |
#5 | |||
|
I use a struble and an oak destop winder. I fish silk and use them a lot. The advantage to the struble is that is folds up for storage if you are just using
it occasionally.
|
||||
|
|
||||
Short Tip |
#6 | |||
|
Whatever you use, make sure you load on/off with the spools matching, under to under or over to over - Like this - o_o and not like this - o/o to avoid line twist. Oh, and Dennis - I have one of those electric winders with all the attachments sitting in a box in the garage - I'm sure we could work something out!
Last Edited By: Short Tip 07/13/2009 07:34.
Edited 2 times.
|
||||
|
|
||||
dennis.fiberglassflyro... |
#7 | |||
|
Thanks for the information on the Struble and Reel-E-Good.
Any concern about putting too much tension on the backing? How do you regulate? Dennis |
||||
|
|
||||
Short Tip |
#8 | |||
|
That's really only a concern with stretchy line - backing's no problem. I usually regulate the tension with a rubber band wrapped around the axle the
spool is mounted on - just to prevent overrun of the spool.
|
||||
|
|
||||
dennis.fiberglassflyro... |
#9 | |||
|
Short Tip,
Thank you --I like the rubber band technique -- sort of a slip clutch. Dennis |
||||
|
|
||||
Marty |
#10 | |||
|
Why Mr Short Tip only the good ones of course
|
||||
|
|
||||
Short Tip |
#11 | |||
|
Well, I was just funnin ya about the multiple posts - they disappeared so it isn't funny anymore - if it ever was......
Good strategy on the sink tip guys - though I doubt they'll have much in the boxes you'll want!
|
||||
|
|
||||
Marty |
#12 | |||
|
I knew you were funnin and that's why I replied in the same vein. I tend to pontificate about buying best quality stuff that will last a long time.... an
unpleasant trait...but I am a big booster for these little cottage companies and the stuff they make (not just line)...... As a long time corporate buyer of
goods for retail I know how few of these little guys are around and probably beat my personal dead horse too often and too vociferously
|
||||
|
|
||||
Short Tip |
#13 | |||
|
That's OK, you are preaching to the choir with me, we're swimming upstream in a big-box river. "Whoa! That Duluth pack is expensive!"
"Yeah, it costs twice as much but lasts 10 times longer, with a lifetime guarantee, so it's actually cheaper.......""Whoa! That Duluth pack is expensive!"
|
||||
|
|
||||
bulldog1935 |
#14 | |||
ttrotter wrote:I'm with Short Tip - Struble - cancel out Tom's vote.
the rods are never obsolete - the marketing is.
|
||||
|
|
||||
newtobamboo2 |
#15 | |||
|
I use a coffee can with a nut &bolt centered on the bottom. I can suck the line right off with a battery drill. And It holds a lot of different lines for
temps. No sets in the lines with big loops.
mark.computershop (at) gmail.com
|
||||
|
|
||||
ttrotter |
My vote--CANCELLED? | #16 | ||
|
How dare you
![]() .
I love my Struble and would not do without it--but. with a cheapo Reel-E-Good, (functional, but not "in Love") you can also switch out one line back to its original spool (in the case of plastic lines) and put a different line back on the same reel. Just adds an element of versatility. The Struble is primarily used for drying my lines, but I also use it to switch lines on occasion. I love fooling with lines so much, I find it useful to have both available. Begging you all not to cancel my vote but to excersize your right to vote! Regards, Tom |
||||
|
|
||||
ttrotter |
#17 | |||
|
newtoboo, now that sounds like a rig I could fall in love with!! I'll bet your reels scream.
|
||||
|
|
||||
Marty |
#18 | |||
|
I used a coffee can for a long time (and still do from time to time especially when traveling). But I feel really sad to now realize it was a manual can when I could have had an automatic!!!! Thats really cool!!!!! Sitting around camps and lodges its always fun seeing the "what the he** is he doing?" looks as I do my line chores after dinner or the evening rise... the drill and the can would really confuse them!!!!!! |
||||
|
|
||||